Visualizzazione Stampabile
Macchè, niente da fare. Guarda, la mia sbox.conf è così
[main]
server_only=1
log=0
userspath=/PLUGINS/OpenXCAS/SboxCAS/users.sbox
webinterface=1
webport=8080
[slot0]
active=1
sci=/dev/scard
ncdserver=1
deskey=0102030405060708091011121314
port=33000
mhz=357
[NCMExxxx]
rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxx
ok_view=1
emm=0
portlist=0
[NewCamd]
server0=user: pass@127.0.0.1:33000/0102030405060708091011121314/256
ho messo lo spazio dopo user: senò usciva :p
Citazione:
Originariamente Scritto da kenpo
Prova questa
[main]
server_only=0
log=0
userspath=/PLUGINS/OpenXCAS/SboxCAS/users.sbox
webinterface=1
webport=8181
[slot0]
active=1
sci=/dev/scard
ncdserver=1
deskey=0102030405060708091011121314
port=33000
mhz=357
reader=1
[NCMEDXXX]
rsa=XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
idea_key=xxxxxxxxxxxxxxxxxxxxxxxxxxxx
boxkey=
emm=0
portlistpath=/var/keys/port.list
quindi la boxkey non serve xkè ho la tessera, ma la idea key non riesco a trovarla
Controlla i PMCitazione:
Originariamente Scritto da kenpo
Ha iniziato a funzionare, finalmente, ma non sempre decripta al primo colpo e se lo accendo già sintonizzato su un canale premium rimane scuro, devo prima stare su uno in chiaro e dopo un po' cambiare. Xò così se dovessi mettere il timer per registrare non funzionerebbe, montando una diablo forse lo risolvo. Devo configurla o va subito configurando niente la diablo?
Ok finalmente ti funziona...purtroppo è un po lenta nella partenza ma cmq va...basta che fai un po di zapping...dobbiamo aspettare nuovi sviluppi su questa emu...che al momento è l'unica che legge la mediaset...Citazione:
Originariamente Scritto da kenpo
La diablo va configurata ma non so se risolvi su questo problema....
Ciao a tutti, io ho sbox 0.0.47 #4 e CCCam 2.1.4 ma ho sempre scramble. Il mio sbox.conf è il seguente:
[main]
server _only=1 # 0=emu+newcamd server 1=only newcamd server
log=0 # 1=no log 1=log to /tmp/sbox.log //ALWAYS USE 0//
userspath=/PLUGINS/OpenXCAS/SboxCAS/users.sbox # users list
webinterface=1 # 1=web interface on 0=web interface off
webport=8080 # web interface port
[slot0]
active=1 # 0=inactive 1=active
sci=/dev/scard # lower
ncdserver =1 # 0=newcamd server off 1=newcamd server on
deskey=0102030405060708091011121314 # newcamd deskey
port=15000 # newcamd port
mhz=700 # Mhz for card in this reader, DON'T WORK ON PHOENIX INTERFACE. Example: mhz=357, mhz=368
reader=1 # 0=phoenix, 1=sci (internal reader), 2=smartreader
# How to ADD RSA for TIGER/NCMED cards
# If your card is a ROM TIGER547 Rev124 (for example)
# [TIGER547] <- this is the rom version from your card
# rsa=xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx
# ONLY THIS, for config bloquer, portlist, etc, look at the examples above!
#Nagra2/3 Example
[CCCCCCCC] # nagra2 camid (4 bytes)
rsa= # rsa "n" from this card (like newcs)
boxkey= # boxkey from this card
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath=/var/keys/port.list # path from port.list
#Nagra tiger/ncmed Example
[NCMED005] # nagra camid (4 bytes)
rsa= xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxx
boxkey= xxxxxxxxxxxxxxxxxxxxxxxxxx
emm=0 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Seca Example
[CCCCCCCC] # seca camid (4 bytes)
ok_view=0 # if ok_view=1 sbox simulates the "ok view this season" on seca smartcards
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Viaccess Example
[CCCCCCCC] # via camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
aeskey= # aeskey used by nano d2
#Irdeto Example
[CCCCCCCC] # irdeto camid (4 bytes)
camkey=0000000000000000 # CamKEY
camkeydata=000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000000000000000000000000000000
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#NDS Example
[CCCCCCCC] # nds camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
boxid= # if sbox can't get boxid from card, add here manually
#Conax Example
[CCCCCCCC] # conax camid (4 bytes)
emm=7 # 0=accept all 1=block emms 2=block emmu 4=block emmg
portlist=0 # use portlist or no
portlistpath= # path from port.list
#Example configuration newcamd client
[NewCamd]
#server0=dummy:dummy@localhost:15050/0102030405060708091011121314/0
#server1=dummy:dummy@localhost:15051/0102030405060708091011121314/2
#server2=dummy:dummy@localhost:15052/0102030405060708091011121314/7
Ovviamente ho rsa e boxkey che qui non ho riportato e il ccam.cfg è il seguente:
#DVB API: -1
################################################## ##################
# CCCAM 2.09 #
################################################## ##################
N: 127.0.0.1 12000 local local 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
#C: dyns port user pass
################################################## ##################
################################################## ##################
SOFTKEY FILE : /EMU/OpenXCAS/dvbapiCAS/SoftCam.Key
AUTOROLL FILE : /EMU/OpenXCAS/dvbapiCAS/AutoRoll.Key
CAID PRIO FILE : /EMU/OpenXCAS/dvbapiCAS/CCcam.prio
PROVIDERINFO FILE : /EMU/OpenXCAS/dvbapiCAS/CCcam.providers
CHANNELINFO FILE : /EMU/OpenXCAS/dvbapiCAS/CCcam.channelinfo
################################################## ####################
# Other config settings #
################################################## ####################
# server shall listen on this port pro incoming connections
# default port is 12000 , disable server with parm -s or set port 0
#
SERVER LISTEN PORT : 17500
# server can give some info about server and client connections
# and cardinfo using telnet or webbrowser.
#
# Switch on/off access to info
# default is yes
#
ALLOW TELNETINFO : yes
ALLOW WEBINFO : yes
# The webinfo service can be protected with a username and password.
# This is switched off by default
#
#WEBINFO USERNAME : <username>
#WEBINFO PASSWORD : <password>
# The telnetinfo service can be protected with a username and password.
# This is switched off by default
#
#TELNETINFO USERNAME : <username>
#TELNETINFO PASSWORD : <password>
# default port for telnet is 16000
# default port for web is 16001
# supported commands:
# info
# activeclients
# clients
# servers
# shares
# providers
# entitlements
# example use:
# echo servers | telnet localhost 16000
# go with your browser to http://ip_CCcam_server:16001
#
TELNETINFO LISTEN PORT : 16000
WEBINFO LISTEN PORT : 16001
# time in seconds to keep On Screen Display active.
# default is 0 (turned off)
# ecc.... ecc.......
Dove sbaglio??????????
Anche dando da telnet il comando, mi fa tutta l'operazione inizializzando la newcam ecc, ma non va nulla.
@bodyhi
Oltre alla RSa prova a inserire anche la idea_key
Ora funziona, ma ha diversi blocchi, che poi cmq supera. C'è modo di non avere blocchi o la visione è questa e non c'è da fare nulla?
Prova a settare la frequenza...magari abbassandola a 357Citazione:
Originariamente Scritto da bodyhi11